Stainless Steel and Nickel Precision Tubes

All of these products are produced to order and can be supplied in fixed lengths, coils or cut pieces on very short lead times and can be shipped to any part of the world.

Capillary Tubes

We offer these tubes:

• With an outside diameters from 0.30mm through to 3.50mm diameter
• With wall thicknesses from 0.10mm up to 0.50mm thick
• In welded and re-drawn
• In the half hard, hard or annealed condition
• In the bright polished, electro polished or bright annealed finishes
• In fixed lengths from 2500mm – 6000mm or in coils.

Re-Drawn tubes in fixed lengths and coils

We offer these tubes:

• With an outside diameters from 0.30mm through to 3.50mm diameter
• With wall thicknesses from 0.10mm up to 0.50mm thick
• In welded and re-drawn
• In the half hard, hard or annealed condition
• In the bright polished, electro polished or bright annealed finishes
• In fixed lengths from 2500mm – 6000mm or in coils.

Seamless Tubes

We offer these tubes:

• With an outside diameters from 1.00mm through to 20mm diameter
• With wall thicknesses from 0.10mm up to 2.00mm thick
• In welded and re-drawn
• In the half hard, hard or annealed condition
• In the bright polished, bright annealed or ground finishes
• In fixed lengths from 3000mm – 6500mm or in coils.

Thermocouple tubes

We offer these high corrosion resistant and high temperatures thermocouple tubes:-

• With an outside diameters from 3.00mm through to 6mm diameter depending on the clients requests
• With wall thicknesses up to 1 mm thick
• In welded and re-drawn
• In the half hard, hard or annealed condition
• In the bright polished, bright annealed or ground finishes
• In fixed lengths from 3000mm – 6500mm or in coils.
• We offer all of these products in Grades 304, 304L, 316 and 316L.

Heating element tubes

We offer these high corrosion resistant and high temperatures heating element tubes:-

• With an outside diameters up to 10mm diameter depending on the clients requests
• With wall thicknesses up to 1 mm thick
• In welded and re-drawn
• In the half hard, hard or annealed condition
• In the bright polished, bright annealed or ground finishes
• In fixed lengths from 3000mm – 6500mm or in coils.
• We offer all of these products in Grades 304, 304L, 316 and 316L.

Cannula for Hypodermic Needles

We offer these hypodermic needles:

• With an outside diameter from 0.3mm through to 4.0mm diameter
• With wall thicknesses from 0.09mm up to 0.15mm thick
• We can also offer a wide range of special needles using micro tubes and cannula.
• We offer all of these products in Grades 304, 304L, 316 and 316L.
• All cannula products are 100% inspected during the processing stage and each batch is finally subject to penetration tests.

Production Standards

Scope

All of these products are produced to order and can be supplied in fixed lengths, coils or cut pieces on very short lead times and can be shipped to any part of the world.

Special Grades

We can also offer any special grades such as Nickel Alloys on request

Applications

Measuring, control and monitoring systems in the chemical and petrochemical industries, shipbuilding, offshore industries and paper industries.

Tube Bundles

Available on request produced from our stainless steel tubes: Pre-insulated single or assembled multiple tubing with options for steam or electrical trace heating, providing a system for safe transmission and temperature control of gasses and liquids.

Minimum mill production quantities may apply.