Stainless Steel Slit Strip

Slit to Width Stainless Steel

Special Metal Alloys are a leading supplier of stainless steel narrow and slit to width coil and offer an extensive range of stainless steels materials in narrow and slit to width coils to a number of industry types including;

  • Chemical
  • Oil & gas
  • Medical
  • Appliance
  • Automotive
  • Power generation
  • Marine environments

Whether part of a total packaged order or an individual product order we can supply stainless steel narrow and slit width coil in a range of thicknesses, widths and finishes.

If you require any grade of high quality Stainless Steel material in narrow and slit coil products at a highly competitive price either on a “just in time” supply or forward contract basis Special Metal Alloys can deliver on specification, price and delivery every time.

Stainless Steel Coil Processing Facilities

Slitting Facilities:

18 Slitting lines

  • Gauge : From 0.1mm up to 6.0mm
  • Width : Max 1320mm on a thickness from 0.1mm to 3.0mm, Max 400mm on a thickness from 3.0mm to 6.0mm

Cut to Length Facilities:

8 Blanking lines

  • Gauge: From 0.4mm up to 6.0mm
  • Width: Standard production up to 1500mm
  • Lengths: 65mm up to 6000mm

Polishing Facilities:

  • 1 Abrasive belt polish
  • 1 Brush polishing line
  • Width/Finish: 240 grit up to max 900mm wide, 320 grit up to max 625mm wide

Traverse Winding Facilities:

We can supply traverse would material from 0.6mm up to 3.00mm thick and 10mm to 60mm wide, in all grades of steel. We have 4 traverse winding lines on site, with over 15 years experience in this type of processing.

Traditional ‘pancake’ coils at narrow widths often have the disadvantage of restricted OD, i.e. short coil lengths. For continuous feed applications, e.g. presswork, there is a growing demand for longer running feedstock.

Why stop your production six times to load traditional ‘pancake’ coils when you could do it once with Traverse wound coils.

We can offer 2 inside coil diameters: 16” (406mm) or 20” (508mm)

We can offer de-burred edges on certain sizes.

Special Edges:

We can offer de-burred and fully rounded edges on certain sizes.


We can supply poly-coating solutions and paper interleaving for surface protection.

Tempered Strip

We have a dedicated team and facilities to produce top class temper rolled strip in various hardness ranges and specifications. The mill is capable of rolling a wide variety of gauges and tempers to suit the most demanding applications. A tension levelled product can also be offered where flatness is crucial.

Production, Stock Range, Rolling Programme:

  • Gauge Range: 0.20mm up to 3.0mm
  • Hardness Range: ¼ hard, ½ hard, ¾ hard and full hard
  • VPN Ranges: TR 230, TR 280, TR 330, TR 380 and TR 430

We can also offer custom rolled to encompass your specific hardness ranges.
Material can be supplied in sheared slit edges and de-burred/ dressed conditions.


  • Stock grades: 301, 304 and 316
  • To order: 201, 321 and 430

In House Rolling

Gauge: 3.0mm max – 0.20 min


Widths: 6.0mm – 610mm (depending on gauge range)

Please Note that Minimum Order Quantities may apply on Mill Production.

Contact Us
Contact Us